Product

There are 6 small knobs on the top of the M1 panel:

TRE, MID, BASS knobs are for manually adjusting the tone of your voice from the microphone.

The PITCH knob is for adjusting the pitch of the 4 voice-changer modes and HOST, SING, OST 3 sound modes.

The MUSIC knob is for adjusting the volume of accompanying music (this includes Bluetooth music and wired input music from the MUSIC port).

MONITOR is for adjusting the volume of the headphones and speaker. 2 large knobs.

REVERB adjusts the reverb/echo effects of your voice from microphones.

OUTPUT is for adjusting the output audio volume to PHONE or PC ports.

In the middle of the bottom half of the panel, there are 3 slider knobs. The left slider is for adjusting the volume of MIC L group (MIC L1, MIC L2). The mute button is for mute the two mics. The right slider and right mute button are doing the same for MIC R group (MIC R1, MIC R2). The middle slider is for adjusting the volume of instrument.

The red +48V button has nothing to do with the INST slider. The +48V button is the on/off 48V phantom power. It will add 48 volts to the left and right mics (MICL1 and MIC R1). MIC L1 port and MIC R1 port are for 48V condenser microphones. Only when you open red +48V button, the two MIC ports will start work. MIC L2 and MIC R2 are for 5V condenser microphones or dynamic microphones. The microphones in our bundles are condenser. If you want to use your own dynamic mic, you need to switch MIC SETTING to dynamic.

• Sample Rates：24 - bit, 48 KHz

• Frequency Response：20Hz to 20 KHz+0/-1 db

• System Delay：1.5ms

• T.H.D：＜0.05％

• Input Crosstalk：＜-120db @ 1KHz（AdjacentChannels）

• S/N Ratio：90dB single channel - fader max （A-weighted）

• Dynamic Range：100dB single channel - fader max （A-weighted）

• Common Mode Rejection Ratio：＞70dB @ 1 KHz

• MIC Impedance：3kΩ（XLR Balance);6.6kΩ（1/4）

• MIC Gain： 0 to 60 dB（XLR);-20 to 40 dB（1/4）

• Power Supply： DC 12V（4A）

• Dimensions（mm）：260（L）×230（H）×89（D）

• Weight：1.45kg

MIXX8.6 8-Channel Digital Mixer

MIXX8.6 digital mixer designed with 8 inputs and 6 outputs. Built-in digital audio processing functions, such as effect, EQ , compressor, etc. And it is equipped with a USB interface, which can transmit audio by mobile phones and computers. It has 16 types of digital reverb effects, which can be easily adjusted for various occasions with the encoder. MIXX8.6 has a simple and exquisite appearance, with reasonable layout of function buttons, suitable for various small-scale performances, conferences, speeches, KTVs, live streaming, and other occasions.

Audio Interface Commander M100

3.5mm Wired Earbuds, 3M Long Cord Earphones, Deep Bass, Stereo, In-Ear Shape, Lightweight, Durable, 9.8 ft (3 m) Long Cord Earbuds, for TV TVs, Smartphones,...

Podcast Equipment Bundle Aluminum Alloy Panel with Studio Condenser Microphone Sound DJ Mixer Broadcast Audio Interface [DIY Sound Effect] For PC/Laptop/Phone,Streaming/Podcasting/Recording

• Advanced circuit design and high quality electronic components features low noise, low distortion, wide dynamic range and strong anti-interference ability 

• 3-band EQ for high,  and low frequency adjustment effectively improve the tone 

• With signal overload (clip) indication, 80Hz low cut function 

• Built-in +50dB low noise microphone preamplifier and 48V phantom power supply suits different kinds of microphone 

• Stereo input channel with sensitivity adjustable (+4db, -10db) switch can match with different kinds of input sound source 

• 60mm sliding potentiometer controls the main output volume efficiently and expediently 

• With RCA CD input, recording output terminal, MAIN output and CTRL ROOM, PHONES monitoring output 

• Built-in DSP effect with 100 kinds of effect choices meet various occasions and user requirements 

• Built-in German USB chip sound card for free driver and convenient connection with computer (only need one USB cable)