Product

* Quad Small Form-factor Pluggable (QSFP)

* Maximum Aggregate Data Rate 100Gbps

* EDR, FDR, QDR, DDR, SDR (Infiniband)

* 10/25/40/100G Ethernet

* Bi-directional parallel link

* BER<1e-12 From 0 to 50-degree case temp

* CDR  on/off  automatically

* 10/14/25/28Gb/s per lane, x4 channels

* Up to 70m (OM3)

* Up to 100m (OM4)

* Low power consumption

* Round multi-mode fiber array

* 850nm VCSEL four array

* PIN diode four array

* Hot-Pluggable

* I2C management interface

* 3.3V power supply voltage

* Maximum 2W power consumption

* Hot pluggable QSFP28/QSFP+/SFP28/SFP+ form package
* Data rate range from 25Gb/s to 100Gb/s
* Transmission distance range 0.5-100m@MMF varied (customized according to customer requirements)
* With High reliability and Low power consumption
* RoHS compliance
* Operating temperature range: 0~70°C(Commercial)
 

* Support ITU-T G.984.2 GPON OLT C+++ application

* Single fiber bi-directional data links with symmetric 2.488Gbps Tx and 1.244Gbps Rx

* 1490nm continuous-mode transmitter with DFB LD

* 1310nm burst-mode receiver with APD-TIA

* 2-wire interface for integrated digital diagnostic Monitoring

* Receiver RESET, Signal Detect, RSSI function indication (RESET, RX_SD, RSSI)

* SFP package with SC/UPC receptacle optical interface

* Single +3.3V power supply

* Operation case temperature -40~85°C for industrial and 0~70°C for commercial

* RoHS6 compliance

* Support ITU-T G.984.2 GPON OLT C++ application

* Single fiber bi-directional data links with symmetric 2.488Gbps Tx and 1.244Gbps Rx

* 1490nm continuous-mode transmitter with DFB LD

* 1310nm burst-mode receiver with APD-TIA

* 2-wire interface for integrated digital diagnostic Monitoring

* Receiver RESET, Signal Detect, RSSI function indication (RESET, RX_SD, RSSI)

* SFP package with SC/UPC receptacle optical interface

* Single +3.3V power supply

* Operation case temperature -40~85°C for industrial and 0~70°C for commercial

* RoHS6 compliance

* Support ITU-T G.984.2 GPON OLT C+ application

* Single fiber bi-directional data links with symmetric 2.488Gbps Tx and 1.244Gbps Rx

* 1490nm continuous-mode transmitter with DFB LD

* 1310nm burst-mode receiver with APD-TIA

* 2-wire interface for integrated digital diagnostic Monitoring

* Receiver RESET, Signal Detect, RSSI function indication (RESET, RX_SD, RSSI)

* SFP package with SC/UPC receptacle optical interface

* Single +3.3V power supply

* Operation case temperature -40~85°C for industrial and 0~70°C for commercial

* RoHS6 compliance

* Applied to EPON OLT for a Single Fiber Bi-directional EPON System
* SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472
* Burst Digital Receiving Signal Strength Indication (RSSI)
* Single 3.3V power supply
* Operation case temperature -40~85°C for industrial, -25~85°C for extended and -10~70°C for commercial
* RoHS-6 compliance

* Applied to EPON OLT for a Single Fiber Bi-directional EPON System
* SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472
* Burst Digital Receiving Signal Strength Indication (RSSI)
* Single 3.3V power supply
* Operation case temperature -40~85°C for industrial, -25~85°C for extended and -10~70°C for commercial
* RoHS-6 compliance

* Applied to EPON OLT for a Single Fiber Bi-directional EPON System
* SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472
* Burst Digital Receiving Signal Strength Indication (RSSI)
* Single 3.3V power supply
* Operation case temperature -40~85°C for industrial, -25~85°C for extended and -10~70°C for commercial
* RoHS-6 compliance

* Max. 2M buffer memory built in chip.
* Auto negotiation back pressure flow control for full duplex IEEE802.3 X and half duplex.
* Automatic identification of MDI/MDI-X cross line
* High-performance1.4Gbps memory bandwidth.
* LED display for PWR,link/activity, full/half duplex,100M,1000M
* Forward 1600 bytes packet for management;
* max. transmission distance can be 120km;

Optional Features:

* Supports link fault pass through function (LFP);
* Supports for end fault function;

* Support EEPROM configuration;

* Pass all packets without address and CRC check;
* Forward fragments.